There are a few simple things you can do when using your dryer to reduce its running cost.
1) Make sure you clean your lint filter before every use. A full lint filter consumes more energy and is also a fire hazard.
2) Do not over dry your cloths. This will waste energy and is also detrimental to your cloths. Over drying can cause creases and gives the fabric a rough feel. If you can use an auto sensing dryer lg dryer repair pasadena.
3) Do not mix heavyweight cloths such as jeans with lightweight articles such as sheets.
4) External venting will save you money. As the moist air is vented the drying time will be shorter because the moist air is not recirculated. This will also lead to airborne lint being expelled from the house. External venting also leads to less moisture in the house which will reduce the possibility of mould forming and paint stripping.
5) Don’t put soaking wet cloths in your dryer. Put your cloths in the cloths washer on the spin cycle and this will remove most of the excess water. The faster the spin speed the dryer your cloths will be.
6) Don’t overload your dryer. It means a longer drying time, using more electricity and this can cause wrinkles and drying unevenness.
7) If you do not have your dryer vented make sure there is a good airflow as this will reduce running time.
A few ways nature can help reduce your bills as well:
1) If the weather is bad or you have a bad forecast, try to avoid washing large loads if you have to use a dryer.
2) Partly drying the load in the sun or wind (even on a cloudy day) will save energy – the dryer can then be used to finish off the drying as required.
3) Use the sun and the wind whenever you can. It’s the most environmentally friendly dryer of all!
Remember do not leave your cloths out in the sun to long as this will lead to fading!
Remember do not give your cloths extra time in the dryer and try to let them dry naturally as this will lead to a longer life for your cloths and of course will lead to a lower electricity bill!